With the increasing demand for anti-corrosion wood, the problems arising from anti-corrosion wood appear, such as anti-corrosion wood is more likely to crack than other wood. Why anti-corrosion wood cracking has been the most distressing problem for people. Many people will feel more distressed because they don't know the relevant knowledge. In fact, these are normal conditions. As long as simple methods and daily simple nursing can be effectively avoided, Jinan anti-corrosion wood manufacturers will explain it to you.
In fact, wood cracking is a normal phenomenon, any wood will crack, which we can not avoid, because the wood itself is easy to change with the change of the environment, so it is not surprising that the phenomenon of cracking occurs. The anticorrosive wood is an example. Because a large amount of antiseptic solution will be injected into the wood during the process of anti-corrosion processing, it can not give the anti-corrosion wood enough air drying time, so the surface of the anti-corrosion wood will lose water during the use, resulting in the uneven moisture, uneven internal and external tension, deformation and cracking of the anticorrosive wood.
In order to avoid the cracking of anticorrosive wood, we need the pre treatment and later maintenance. In the early treatment, we can give the wood enough air drying time, or dry it with a drying kiln to reduce the moisture content of the wood. This method can greatly reduce the probability of wood cracking, but the wood production cycle is long and the cost is high.
After the anticorrosive wood products are made, the wood oil shall be painted in time to keep the moisture. In the later maintenance, especially for outdoor anti-corrosion wood products, they are more likely to suffer from wind blowing, sun and rain all year round, which makes it easier to crack and deform. This requires our observation and timely maintenance at any time. When cracking problems occur, the joints are filled with marble glue, and then a layer of wood oil is applied to effectively lock the moisture inside the wood, thus reducing the water content in the wood The appearance of cracking and deformation.
Although treated wood can prevent bacteria, mildew and termite erosion, we still recommend that you apply wood protective paint on the surface after the completion of the project after the wood is dry or air dried. When using the special paint for outdoor wood, it should be noted that it should be shaken well first. After finishing, it takes 24 hours of sunny weather to make the coating film on the wood surface.
In a word, the cracking of anticorrosive wood products is caused by the imbalance of internal and external moisture, so the method of balancing the moisture inside and outside of wood can delay the cracking of wood. Therefore, when the anti-corrosion wood products bring comfort and warmth to you, don't forget to maintain it, prolong its life, and do not think of the complicated process. In order to avoid the trouble and enjoy the good experience, then put more effort in the early stage